How To Set The Clock On A Panasonic Car Stereo

Panasonic Audio, Audio, How to set up the fourth dimension, change the clock, alter time

How to set the clock. Panasonic Sound products

Select a model.

---

RX-D550

This is a 24-hr clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow upwards ▲ or down ▼ button to set the time and and then press [OK].

To cheque the time

1. Press [SETUP]. repeatedly to select "CLOCK" and and so press [OK].
2. In standby mode, press [Brandish].

Notation:

• The clock is reset when in that location is a power failure or when the AC power supply cord is removed.
• Reset the clock regularly to maintain accuracy.
• If the unit is powered by batteries, the clock setting will be lost when the unit is turned off.

SC-AKX14

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within ten seconds press the arrow upwardly ▲ or down ▼ button to prepare the time.
3. Press [OK] to cease.

To check the time

1. Printing [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a power failure or when the Ac power supply cord is removed.

SC-AKX18

This is a 12-hr clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the pointer up ▲ or down ▼ button to set the time and then press [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby mode, printing [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-AKX640

This is a 12-hour clock.

To Ready

1. Printing [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow left ◄ or right ► push button to to set the fourth dimension.
3. Printing [OK].

To cheque the time

1. Press [SETUP]. repeatedly to select "CLOCK" and and so press [OK].
2. In standby way, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-CH400

This is a 12-hour clock.

To Set up

1. Printing [SETUP] repeatedly to select "CLOCK".
2. Press the pointer upward ▲ or downwards ▼ button to set the time then press [OK].

To check the time

1. Printing [SETUP]. repeatedly to select "CLOCK" so press [OK].
2. In standby mode, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accurateness.

SC-HC200

This is a 12-hour clock.

To Ready

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow up ▲ or downwards ▼ push to set the time and so printing [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then printing [OK].
2. In standby mode, printing [Brandish].

Note:

• Reset the clock regularly to maintain accuracy.

SC-HC25

This is a 12-60 minutes clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within 10 seconds press the pointer upwardly ▲ or down ▼ push button to set the time.
3. Press [OK] to cease.

To bank check the time

1. Press [CLOCK/TIMER].

Annotation

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a power failure or when the Air-conditioning ability supply cord is removed.

SC-HC295

This is a 12-hour clock.

To Set up

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow up ▲ or downwards ▼ push to set the fourth dimension and then printing [OK].

To cheque the time

1. Press [SETUP]. repeatedly to select "CLOCK" and so press [OK].
2. In standby manner, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-HC300

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow upward ▲ or downward ▼ push button to gear up the time then printing [OK].

To check the time

1. Printing [SETUP]. repeatedly to select "CLOCK" and and then press [OK].
2. In standby mode, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-HC400

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Inside 20 seconds press the arrow up ▲ or down ▼ button to set the time.
3. Printing [OK] to finish.
   

To check the time

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a power failure or when the AC power supply string is removed.
• Buttons vary by model

SC-HC410

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within twenty seconds press the arrow upward ▲ or downwardly ▼ button to set the time.
3. Printing [OK] to end.
   

To check the fourth dimension

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a ability failure or when the Air conditioning ability supply cord is removed.
• Buttons vary by model

SC-MAX4700

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow left ◄ or correct ► button to to prepare the time.
3. Press [OK].

To bank check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby mode, press [DISPLAY].

Notation:

• Reset the clock regularly to maintain accuracy.

SC-MAX670

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within 20 seconds press the pointer up ▲ or down ▼ push to fix the time.
3. Press [OK] to finish.
   

To bank check the time

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accurateness.
• The clock is reset when at that place is a power failure or when the Air-conditioning power supply cord is removed.
• Buttons vary by model

SC-MAX8700

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow left ◄ or correct ► button to to gear up the time.
3. Press [OK].

To check the fourth dimension

1. Press [SETUP]. repeatedly to select "CLOCK" and and then press [OK].
2. In standby mode, press [Display].

Note:

• Reset the clock regularly to maintain accuracy.

Models SC-PM250, SC-PM600

This is a 12-hour clock.

To Prepare

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow up ▲ or down ▼ button to set the fourth dimension and so printing [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and then press [OK].
2. In standby manner, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-PMX100, SC-PMX150

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within twenty seconds press the arrow upwards ▲ or down ▼ button to set the fourth dimension.
3. Press [OK] to finish.
   

To check the time

1. Printing [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accurateness.
• The clock is reset when there is a power failure or when the Ac power supply cord is removed.
• Buttons vary by model

SC-PMX80

This is a 12-hr clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within xx seconds printing the pointer up ▲ or downwards ▼ push to set the time.
3. Printing [OK] to stop.
   

To check the fourth dimension

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accurateness.
• The clock is reset when there is a power failure or when the AC ability supply string is removed.
• Buttons vary by model

SC-PMX9, SC-PMX90

This is a 12-hour clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within xx seconds press the arrow up ▲ or down ▼ button to set the time.
3. Press [OK] to finish.
   

To cheque the fourth dimension

1. Press [CLOCK/TIMER].

Annotation

• Reset the clock regularly to maintain accuracy.
• The clock is reset when in that location is a power failure or when the Air-conditioning power supply string is removed.

SC-RS50

This is a 12-hr clock.

1. Press [CLOCK/TIMER] to select "CLOCK".
   
   
2. Within twenty seconds press the arrow upwardly ▲ or downwardly ▼ button to set the time.
3. Press [OK] to finish.
   

To check the fourth dimension

1. Press [CLOCK/TIMER].

Note

• Reset the clock regularly to maintain accuracy.
• The clock is reset when there is a power failure or when the AC ability supply cord is removed.
• Buttons vary by model

SC-UA3

This is a 12-hour clock.

To Gear up

1. Press [SETUP] repeatedly to select "CLOCK".
2. Press the arrow left ◄ or correct ► button to to set the fourth dimension.
3. Press [OK].

To cheque the time

1. Printing [SETUP]. repeatedly to select "CLOCK" and and so printing [OK].
2. In standby mode, printing [DISPLAY].

Notation:

• Reset the clock regularly to maintain accurateness.

SC-UA7

This is a 12-hour clock.

To Set

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow upward ▲ or downward ▼ button to set the time and then printing [OK].

To check the time

1. Press [SETUP]. repeatedly to select "CLOCK" and and then press [OK].
2. In standby mode, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

SC-UX100

This is a 12-hour clock.

To Gear up

1. Press [SETUP] repeatedly to select "CLOCK".
2. Printing the arrow upwards ▲ or downwardly ▼ button to prepare the time then press [OK].

To check the fourth dimension

1. Press [SETUP]. repeatedly to select "CLOCK" and so printing [OK].
2. In standby mode, press [DISPLAY].

Note:

• Reset the clock regularly to maintain accuracy.

Was this answer helpful?

How To Set The Clock On A Panasonic Car Stereo,

Source: http://eng-ca.faq.panasonic.com/app/answers/detail/a_id/44136/~/how-to-set-the-clock.-panasonic-audio-products

Posted by: velascobutarly.blogspot.com

Share this post